30 inch Base Cabinet Template

Construction Template • Print at 100% scale • Verify ruler accuracy

Assembly Sequence
Step 1: Cut all cabinet box parts to size using cutting diagram.
Step 2: Drill shelf pin holes in side panels for adjustable shelf (5mm holes, 3/8" deep).
Step 3: Cut dadoes in side panels for top/bottom and drawer support shelf.
Step 4: Sand all interior surfaces before assembly.
Step 5: Assemble cabinet box with glue and screws.
Step 6: Install drawer support shelf at 5.5" from top.
Step 7: Install back panel with 1" screws.
Step 8: Build drawer box with 1/2" dado joints.
Step 9: Install drawer slides (22" full extension recommended).
Step 10: Build and attach face frame with pocket screws.
Step 11: Install door hinges and hang doors.
Step 12: Add drawer front and adjust fit.
Key Measurements
• Overall dimensions: 30" wide x 35.25" tall x 24" deep
• Toe kick: 30" wide x 3.5" tall x 24" deep
• Cabinet floor height: 4.25" from ground
• Drawer opening: 27" wide x 5" tall
• Door openings: 12.75" wide x 19.5" tall each
• Interior cabinet space: 28.25" wide x 21.25" deep
• Drawer compartment: 21" deep x 4" tall (interior box)
• Door compartment: 19.5" tall (adjustable shelf)
Hardware Specifications
• Drawer slides: 21" full-extension, soft-close recommended
• Door hinges: 35mm European cup hinges, soft-close
• Shelf pins: 5mm diameter for adjustable shelf
• Drawer handle: 4-6" center-to-center pull
• Door handles: 3-4" center-to-center or knobs
• Screws: 1.25" for assembly, 1" for back panel
Scale Verification Ruler

IMPORTANT: This ruler must measure exactly 6 inches when printed. If not, adjust printer settings.

0"
1"
2"
3"
4"
5"
6"
Cabinet Specifications
Specification Measurement
Width 30"
Height 35.25"
Depth 24"
Configuration 2 Doors + 1 Drawer
Materials List
Component Material Dimensions Qty
Side Panels 3/4" Plywood 23" x 33.75" 2
Top/Bottom 3/4" Plywood 28.5" x 21.5" 2
Cabinet Floor 3/4" Plywood 28.25" x 21.25" 1
Toe Kick Front 3/4" Plywood 28.5" x 3.5" 1
Toe Kick Sides 3/4" Plywood 21.5" x 3.5" 2
Back Panel 1/4" Plywood 28.5" x 33" 1
Drawer Bottom Shelf 3/4" Plywood 28.25" x 21.25" 1
Adjustable Shelf 3/4" Plywood 28.25" x 21.25" 1
Drawer Box Sides 1/2" Plywood 21" x 4" 2
Drawer Box F/B 1/2" Plywood 27" x 4" 2
Drawer Bottom 1/4" Plywood 20.5" x 26.5" 1
Face Frame Stiles 3/4" x 1.5" Solid Wood 35.25" long 2
Face Frame Center Stile 3/4" x 1.5" Solid Wood 24" long 1
Face Frame Rails 3/4" x 1.5" Solid Wood 27" long 3
Front View - Kitchen Cabinet Face
30"
35.25"
Drawer: 27" x 5"
Left Door
12.75" x 19.5"
Right Door
12.75" x 19.5"
Toe Kick: 3.5" H

Face frame with drawer above and two doors below. Center stile provides door separation.

Side View - Interior Construction
24" Deep
1/4" Back
3/4" Side
Drawer Box
Fixed Shelf
Adjustable
Cabinet Floor
Toe Kick

24" depth with drawer compartment above and adjustable shelf below.

Plywood Cutting Diagram - 3/4" Sheet (48" x 96")
Side Panel
23" x 33.75"
Side Panel
23" x 33.75"
Top Panel
21.5" x 28.5"
Bottom Panel
21.5" x 28.5"
Drawer Support
21.25" x 28.25"
Adjustable Shelf
21.25" x 28.25"
Cabinet Floor
21.25" x 28.25"
Toe Kick Front: 28.5" x 3.5"
Toe Kick Side: 21.5" x 3.5"
Toe Kick Side: 21.5" x 3.5"
Waste
48"
96"

Efficient 3/4" plywood layout with toe kick. Cut drawer box and 1/4" back from separate sheets.