Scale Verification Ruler
IMPORTANT: This ruler must measure exactly 6 inches when printed. If not, adjust printer settings.
Bed Cabinet Specifications
| Specification |
Measurement |
| Width |
24" |
| Height |
28" |
| Depth |
18" |
| Configuration |
1 Door + 2 Drawers + Open Shelf |
Materials List
| Component |
Material |
Dimensions |
Qty |
| Side Panels |
3/4" Plywood |
18" x 28" |
2 |
| Top/Bottom |
3/4" Plywood |
22.5" x 16.5" |
2 |
| Back Panel |
1/4" Plywood |
22.5" x 26.5" |
1 |
| Vertical Divider |
3/4" Plywood |
16.5" x 26.5" |
1 |
| Fixed Shelves |
3/4" Plywood |
8.625" x 16.5" |
2 |
| Door Panel |
3/4" Plywood |
13.5" x 26.5" |
1 |
| Drawer Box Sides |
1/2" Plywood |
16" x 5.5" |
4 |
| Drawer Box F/B |
1/2" Plywood |
8.125" x 5.5" |
4 |
| Drawer Bottoms |
1/4" Plywood |
7.625" x 15.5" |
2 |
| Drawer Fronts |
3/4" Plywood |
9.375" x 6" |
2 |
Front View - Bed Cabinet Face
24"
28"
Door
13.5" x 26.5"
Drawer
9.375" x 6"
Drawer
9.375" x 6"
Open Shelf
Compact bedside cabinet with door storage, two drawers, and open shelf for easy access items.
Side View - Interior Construction
18" Deep
1/4" Back
3/4" Side
Drawer Shelf
Fixed Shelf
Bottom Shelf
18" depth provides ample storage while maintaining compact bedside footprint.
Plywood Cutting Diagram - 3/4" Sheet (48" x 96")
Bottom Panel
22.5" x 16.5"
Vertical Divider
16.5" x 26.5"
Fixed Shelf
8.625" x 16.5"
Fixed Shelf
8.625" x 16.5"
Remaining
Space
48"
96"
Efficient 3/4" plywood layout. Cut drawer boxes and back panel from separate 1/2" and 1/4" sheets.
Assembly Sequence
Step 1: Cut all parts according to cutting diagram and sand smooth.
Step 2: Drill pilot holes and pocket screw holes for assembly.
Step 3: Assemble main cabinet box (sides, top, bottom) with wood glue and screws.
Step 4: Install vertical divider to separate door and drawer sections.
Step 5: Add fixed shelves for drawer support and interior organization.
Step 6: Square cabinet and install 1/4" back panel with small nails.
Step 7: Build drawer boxes with dado joints and install drawer slides.
Step 8: Install door hinges and hang cabinet door.
Step 9: Attach drawer fronts and adjust for proper fit.
Step 10: Sand entire project and apply desired finish.
Step 11: Install hardware (handles, knobs) and make final adjustments.
Step 12: Test all moving parts for smooth operation.
Key Measurements
• Overall dimensions: 24" wide x 28" tall x 18" deep
• Door opening: 13.5" wide x 26.5" tall
• Drawer openings: 9.375" wide x 6" tall each
• Open shelf: 9.375" wide x 4" tall x 16.5" deep
• Interior door space: 12.75" wide x 25.75" deep
• Drawer box interior: 8.125" wide x 5" tall x 15.5" deep
• Clearance from bed: Position 24-26" from floor for standard bed height
Hardware Specifications
• Drawer slides: 16" soft-close, full-extension recommended
• Door hinges: 35mm European cup hinges with soft-close
• Door handle: 4-5" center-to-center pull or knob
• Drawer handles: 3-4" center-to-center pulls
• Wood screws: 1.25" for main assembly, 3/4" for thin materials
• Pocket screws: 1.25" for internal joints
• Finish nails: 1" for back panel attachment
Finishing Tips
• Sand all surfaces starting with 120-grit, finish with 220-grit
• Use wood conditioner before staining softwood plywood
• Apply 2-3 coats of polyurethane for durability
• Consider pre-finishing interior surfaces before assembly
• Fill screw holes with matching wood filler before final sanding
Safety Notes
• Always wear safety glasses and hearing protection
• Use dust mask when sanding or cutting
• Ensure adequate ventilation when applying finishes
• Check that cabinet is level and stable before loading
• Secure to wall if placing heavy items on top